Publicité
Front-Panel Menu Reference
This section gives an overview of the front-panel menus. The remainder of this
chapter contains examples of using the front-panel menus.
– Select the modulation type.
– Select an internal or external modulation source.
– Specify AM modulation depth, modulating frequency, and modulation shape.
– Specify FM frequency deviation, modulating frequency, and modulation shape.
– Specify PWM deviation, modulating frequency, and modulation shape.
– Select linear or logarithmic sweeping.
– Select the start / stop frequencies or center / span frequencies.
– Select the time in seconds required to complete a sweep.
– Specify a marker frequency.
– Specify an internal or external trigger source for the sweep.
– Specify the slope (rising or falling edge) for an external trigger source.
– Specify the slope (rising or falling edge) of the "Trig Out" signal.
Keysight 33210A User's Guide
Configure the modulation parameters for AM, FM, and PWM.
Configure the parameters for frequency sweep.
Front-Panel Menu Operation
2
45
Publicité
