Publicité
The Rear Panel at a Glance
1 External 10 MHz Reference Input
2 Internal 10 MHz Reference Output
3 External Modulation Input Terminal
Use the
– Select the GPIB address (see
– Set the network parameters for the LAN interface (see
– Display the current network parameters (see
The External and Internal 10 MHz Reference Terminals (1 and 2, above) are
NOTE
present only if Option 001, External Timebase Reference, is installed. Otherwise,
the holes for these connectors are plugged.
8
Terminal (Option 001 only).
Terminal (Option 001 only).
menu to:
4 Input: External Trigger/Burst Gate
Output: Trigger Output
5 USB Interface Connector
6 LAN Interface Connector
7 GPIB Interface Connector
8 Chassis Ground
Chapter
2).
Chapter
Keysight 33210A User's Guide
Chapter
2).
2).
Publicité
