Publicité
3
Features and Functions
Add itional SCPI Configuration Commands (LAN)
There are some additional LAN configuration commands, not covered here, that
are covered in
page 263 for complete information about using SCPI commands for LAN interface
control.
Keysight 33210A Web Interface
The Keysight 33210A provides a web interface resident in the instrument. You can
use this interface over the LAN to view and modify the instrument's I/O
configuration. Also, a remote front panel interface is provided, which allows you to
control the instrument over the network.
To access and use the web interface:
1 Establish LAN interface connectivity from your PC to the 33210A.
2 Open your PC's web browser.
3 To launch the web interface enter the IP address of the instrument, or its fully
4 Follow the directions in the web interface's online help.
USB Configuration
There are no USB configuration parameters to configure. You can retrieve the USB
ID string (set by the manufacturer) by using the Show USB Id feature:
– Front panel operation: Press
– There is no SCPI command to display the USB ID.
154
Chapter
qualified host name, in the browser address field.
Id. The USB string appears in the form:
USB ID = usb0::2391::1031::MY48nnnnnn::INSTR
where "MY48nnnnnn" is the instrument's serial number.
4. See
"Interface Configuration
and press the I/O softkey. Select Show USB
Commands" starting on
Keysight 33210A User's Guide
Publicité
