Publicité
●
Touching the "-" control to set the timer to "00", the timer is cancelled.
Power settings
The heating power of the cooking zones can be set at various power levels. In the
chart you will find examples of how to use each setting.
Cooking level:
Suitable for:
1
Keeping food warm. Simmering small quantity (lowest power
setting).
2
Simmering.
3-4
Simmering larger quantities or roasting larger pieces of meat until
they are cooked through.
5-6
getting juices.
7-8
Roasting, getting juices.
9
Roasting.
P
Roasting (highest power output).
Power management
This hob can be connected to a 13, 20, 25, 32 Amp supply and configured to work on any of these
power settings.
The hob is preset to be connected to a 32Amp supply; When four zones are selected at the same time
the hob will limit the maximum power consumed so that the 7.0kW power supply cannot be exceeded.
In a similar way, when the hob is connected and configured to a 13/20/25Amp supply mode, the hob
will limit the maximum power at 2.5/3.5/4.5/7.0kW.
If, however, the hob is connected and configured to a 32Amp power supply, all four zones can be used
on the maximum setting with boost at the same time.
To change the Power management setting
1. Cut off the power supply to the hob.
2. Leave the power supply cut off for one minutes.
3. Switch on the power supply again.
4. Follow the instructions under "To configure the hob into ECO Mode" from step "1" onward.
NOTE: The ECO Mode Configuration can be entered only once if the power supply of the hob
cut off.
(Note: The ECO mode should be set within one minute after the power is turned on, otherwise
the ECO mode setting cannot be entered after more than one minute)
is not
18
Publicité
