Publicité
Using the Timer
You can use the timer in two different ways:
●
You can use it as a minute minder. In this case, the timer will not turn any cooking zone off when
the set time is up.
●
You can use it as cut-off timer to turn one or more cooking zones off after time is up.
●
You can set the timer up to 99 minutes.
Using the Timer as a Minute Minder
●
Make sure the cooktop is turned on. And zone slection key is not activated (zone indication '-' is
not blinking).
Note: You can set minute minder before or after cooking zone power setting finished.
●
Touch timer key, "30" will show in the timer display and blink. The default setting is 30min.
●
Set the time by touching the "+" or "-" control. (e.g.5)
Short touch for adjusting 1min and long touch for adjusting 10min.
●
When the time is set, it will begin to count down immediately. The display will show the
remaining time.
●
Buzzer will beeps for 20 seconds and the timer indicator shows "- - " when the setting time
finished.
Using the timer to switch off one or more cooking zones
•
Touching the heating zone selection control that you want to set the timer for.
•
Touch timer key, "30" will show in the timer display and blink. The default setting is 30min.
16
Publicité
