Publicité
Les langues disponibles
Les langues disponibles
Congratulations!
You have chosen to purchase a high-quality prod-
uct. Familiarise yourself with the product before
using it for the first time.
Read the following operating
instructions carefully.
Use the product only as described and only
for the given areas of application. Store these
operating instructions carefully. When passing the
product on to third parties, please also hand over
all accompanying documents.
Package contents (Fig. A)
1 x vibration board including handles (1)
1 x mat (2)
1 x remote control (3)
1 x case (4)
1 x battery (3V
CR2032) (5)
1 x wrist strap (6)
1 x power cable (7)
2 x expansion band (8)
1 x operating instructions
Vibration board parts list
Figure B
• control panel (1a)
• massage balls (1b)
• handles (1c)
• vibration areas (WALKING, JOGGING,
RUNNING) (1d)
Figure C
• feet with suction pads (1e)
• mains connection (1f)
• main ON/OFF switch (1g)
Vibration board display (Fig. H)
• 'TIME +' touch-sensitive button: increase the
workout time
• 'SPEED +' touch-sensitive button: increase the
vibration frequency
• 'START/STOP'
touch-sensitive button:
start/stop workout
• 'SET'
touch-sensitive button: select a trai-
ning programme or customised mode
• 'SPEED -' touch-sensitive button: decrease the
vibration frequency
16
GB/IE/NI
• 'TIME -' touch-sensitive button: reduce the
workout time.
Your selection is shown on the display by using
the remote control or pressing the touch-sensitive
buttons.
Remote control parts list (Fig. I)
• turn product on/off, start/stop training (3a)
• 'SPEED +' button: increase vibration frequen-
cy/training time (3b)
• 'M' button: customised training (3c)
• 'P' button: select training programme or stan-
dard mode (3d)
• 'SPEED -' button: reduce vibration frequency/
training time (3e)
Technical data
Mains voltage: 230–240V
Power output: 200W
Ambient temperature: +10°C to +40°C
Vibration action:
side alternating/rocking vibration
Dimensions (L x W x D):
approx. 72.5 x 37.5 x 15cm
Weight: approx. 18kg
Programme: 5
Programme duration: max. 10 minutes
Manual programme duration setting:
1–10 minutes
Vibrations/frequency:
5–16Hz freely adjustable in 20 steps
Amplitude: from the inside out 1–10mm
Remote control power supply:
3V
CR2032
Max. transmission power: -14.74dBm
Frequency band: 2.4GHz
Hardware version: YT-6907-A03 (2020-05-15)
Software version: YT6912_S102_200430.mot
Maximum load: 130kg
130
DC voltage symbol
AC voltage symbol
09/2020
50Hz
Publicité
