CAMPAGNOLA POWER ECO PLUG-IN Manuel D'utilisation Et D'entretien page 88

CAUTION
It is absolutely forbidden to remove the warning plates on the product. CAMPAGNOLA srl. will not be held
liable for the safety of the product if this prohibition is disregarded.
CAUTION
Following use of the product in the workplace, it will be the responsibility of the customer/end user to adopt
the necessary signage, depending on the residual risks present.
CAUTION
The customer/user is obliged to replace warning plates that are illegible due to wear and tear.
4.17.1 ARRANGEMENT OF WARNING PLATES
• On all models manufactured by CAMPAGNOLA S.r.l., warning plates have been identified in order
to signal the residual risks present, the specific types of which are shown below.
• Due to the size of the product, it is not possible to install the warning plates identified for the
product, and for this reason the manufacturer has applied the CE marking plate with the
pictogram of obligation to read and understand the manual in its entirety.
•
Please note that it is the user's precise responsibility, on receipt of the product, to ensure the
integrity of the CE plate affixed to the product in the position indicated and of the warning plates
shown below for the purpose of the correct management of the product and the residual risks that
remain despite the technical solutions adopted.
Information pursuant to "WEEE"
Directive 2012/19/EU: See
paragraph 4.11
This is followed by hazard and prohibition pictograms relating to residual risks that remain.
Please refer to paragraph 1.4 for a description of these.
0310.0436_00
Position of the CE plate affixed to the
product/tool
88
Obligation to read and understand
the manual provided in its entirety