CAMPAGNOLA POWER ECO PLUG-IN Manuel D'utilisation Et D'entretien page 107

FAULT
The tool stops during use
The tool does not start
Excessive overheating
of the head
Abnormal vibration of
rakes.
9. SPARE PARTS
Ways of ordering spare parts:
To place an order for spare parts, please contact your Local Distributor or Dealer or a CAMPAGNOLA S.r.l.
Technical Assistance Centre, stating the quantity and part number of the part you wish to order.
The spare parts list can be found on the CAMPAGNOLA S.r.l. manufacturer's website. Or else, send a written
request to:
specifying:
product serial number;
•
unit type as stated on the rating plate installed on the product. If there is none, describe the piece.
•
description.
•
desired quantity.
•
10. ANNEXES
This chapter contains a list of the DOCUMENTS supplied with the product and form an integral part of this manual
provided by CAMPAGNOLA S.r.l. and should be used as a reference for the use, operation and maintenance of
the components themselves.
General warranty terms and conditions
Machinery Directive Declaration of Conformity
Quick guide
0310.0436_00
CAUSE
Motor overheating due to thick
vegetation.
Max current threshold exceeded
Incorrect assembly between extension
pole/head and/or extension pole/handle
Presence of dirt and/or wear
of internal rotating parts
Wear of rotating parts.
Incorrect tightening of comb fixing
screws.
CAMPAGNOLA S.r.l. Head Office and Plant
40069 ZOLA PREDOSA (BO) Italy
Via Lazio, 21,23,23/A e 23/B Tel. +39 051 753500
Fax. +39 051 752551
www.campagnola.it -
DESCRIPTION
107
Exit from the vegetation, wait for the
automatic release and restart.
Check and replace fuse
Disassemble the extension pole and
check that the motor attachment is
inserted correctly into the pole
coupling.
Clean and service the head
Clean and service the head.
Tighten screws.
star@campagnola.it
MANUFACTURER
CAMPAGNOLA S.r.l.
CAMPAGNOLA S.r.l.
CAMPAGNOLA S.r.l.
SOLUTION