CAMPAGNOLA POWER ECO PLUG-IN Manuel D'utilisation Et D'entretien page 85

DANGER
During operation and maintenance of the product, use footwear, gloves and goggles or safety screen
DANGER
•
Do not carry the product by the power cable.
•
Disconnect the battery pack before carrying out any adjustments or routine and extraordinary
maintenance.
•
When the product is not in use, turn off the ON/OFF switch to avoid unnecessary battery consumption
and/or component deterioration.
•
Carry the product by holding it with the harvesting head pointing backwards in any situation where the
product is not in use and with the power cable unplugged from the connector.
•
Before connecting the power cable, make sure that the connector has clean contacts (no dirt or other
obstructive material), that they are dry and free of oxidation.
•
Disconnect the connector from the power source or remove the battery before carrying out any
adjustments or routine and extraordinary maintenance.
•
Only use the product with the accessories specified by the Manufacturer.
•
Before any routine maintenance operations, read this manual carefully. For maintenance activities that are
not indicated in the manual, please contact the manufacturer's T.A.C. (Technical Assistance Centre).
•
Maintain all labels and pictograms on the product in a perfectly legible and undamaged condition, with
particular reference to those relating to danger and safety signs.
CAUTION
Before carrying out any maintenance or mechanical adjustment of the tool, it is imperative to wear
PPE such as safety shoes, overalls, puncture-proof gloves and goggles to protect the face.
•
Any repair or maintenance work may only be carried out by duly trained personnel. Informed and
instructed, and authorised with the required professional profile (mechanical maintenance technician
and/or electrical maintenance technician) depending on the type of work to be carried out.
•
It is a mandatory requirement to disconnect the product from the power source before any adjustment
and/or maintenance work (battery pack).
•
During operation, maintenance and/or repair work, unauthorised persons must keep a distance of at least
5 metres from the operating range of the product.
•
The removal of protective or safety devices (where fitted) must only be carried out for extraordinary
maintenance operations and only by maintenance personnel, after disconnection of power sources. The
maintenance technician must ensure the safety of all personnel, also in order to avoid any damage to the
product, as well as to restore the effectiveness of the equipment itself at the end of maintenance and
always before using again.
•
All the maintenance operations which are not described in this manual have to be performed by the
manufacturer's T.A.C.
•
The maintenance, repair and troubleshooting work must be concluded with the verification of the correct
functioning and of all active safety devices.
•
When maintenance or repairs have been completed, the product can be started again only if duly verified
by a maintenance technician, who must make sure that:
- work has been completed;
- the product works perfectly;
- the safety devices are activated;
- no one is operating on the product.
4.15 ADDITIONAL PRECAUTIONARY REQUIREMENTS
CAUTION
Ensure that all personnel involved in the maintenance and use of the product are properly trained and instructed
in the correct safety and operating procedures.
Ensure that all personnel are aware of the residual risks present and indicated in par. 4.13
0310.0436_00 85