Ernesto 428593 Conseils D'utilisation Et D'entretien page 108

P R OBL EM P R OBL EM
Steam escapes under the lid.
Liquid or vapor escapes
around the pressure control
valve.
The pressure indicator does
not move down and the lid
cannot be opened.
The opening and closing
system does not work.
In case of strong steam jet
coming out of the safety
valve.
The sealing ring protrudes
from under the lid.
IAN 428593_2301
POSS IB LE CAUS E POSS IB LE CAUS E
The sealing ring is not clean. Clean the sealing ring.
The sealing ring is deformed
and worn.
Temperature setting too high. Use a lower temperature
The device is filled beyond
its maximum capacity.
There is still pressure in the
pressure cooker.
The „ " mark on the lid is not
at the same level as the „ "
mark on the pot handle.
The pressure limit of the safe-
ty valve has been exceeded
due to the clogged steam
release valve.
The sealing ring of the safety
valve is not inserted.
The sealing ring is worn out.
RE ME D Y RE ME D Y
Replace sealing ring with
model no. S223H07.
setting.
Fill the device as described
above.
Wait until the pressure is re-
leased from the unit and set
the pressure control valve to
the steam release position.
Bring both markings to the
same height.
Immediately turn off the
stove and open the pressure
cooker after the pressure has
been completely released. -
Check which part is
clogged. Clean the steam
release valve and the safety
valve in accordance with the
above instructions.
Immediately turn off the
stove and open the pressure
cooker after the pressure has
been completely released.
Insert the sealing ring
correctly into the recess
provided for it in the safety
valve.
Replace the sealing ring.
108 |
koÜDq