Fulgor Milano FUO 6011 P MT Instructions Pour L'installation Et L'utilisation page 73

WARNING
Make sure that:
1
• The oven and lights are cool and power to the oven has
been turned off before replacing the light bulb(s). Failure
to do so could result in electrical shock or burns.
• The lenses must be in place when using the oven.
• The lenses serve to protect the light bulb from breaking.
• The lenses are made of glass. Handle carefully to avoid
breakage. Broken glass could cause an injury.
(230V - 15 or 25W)
2
1
1 Turn off power at the main power supply (fuse or breaker
box).
2 Remove the lens (1) by unscrewing it.
3 Remove the light bulb (2) from its socket (3).
4 Replace the bulb (2) with a new one. Avoid touching the
bulb with fingers, as oils from hands can damage the bulb
when it becomes hot.
5 Use one with the same Volt and Watt (see Fig. 12).
6 Screw the lens (1) back on.
7 Turn power back on at the main power supply (fuse or
breaker box).
29 - Replacement of the oven light
3
EN
35