Pommier A5441 Mode D'emploi page 30

5b. MOUNTING 2: USING THE OPTIONAL SPACERS
Installation option 2a - Drilled low plate on the 45x45 pre-drilled chassis side rail using the optional
spacer, ref. 294544112.
You must use 2 rows of 4 x M14 class 10.9 screws on each side rail to attach the plates to the spacers and 2
rows of 4 x M14 class 10.9 screws to attach the spacers to the side rails.
Front of
the
vehicle
Mounting screws for the chassis not supplied,
Kit ref. 29.4544101
Spacers installation for a horizontal and vertical centre distance of 45 mm,
Installation option 2b – Drilled low plate on the pre-drilled 50x50, 50x55, 50x60, 60x50, 60x55 and 60x60
chassis side rails, using the optional spacer ref. 294544111.
You must use 2 rows of 4 x M14 class 10.9 screws on each side rail to attach the plates to the spacers and 2
rows of 4 x M14 class 10.9 screws to attach the spacers to the side rails.
Front of
the
vehicle
Mounting screws for the chassis not supplied,
Kit ref. 29.4544101
Front of
the
vehicle
Mounting screws for the chassis not supplied,
Kit ref. 29.4544101
Spacers installation for a horizontal centre distance of 50 mm,
Spacers installation for a horizontal centre distance of 60 mm,
Mounting screws for the spacers supplied.
It is possible to mount the plate at 3 different heights.
Mounting screws for the spacers supplied.
Figure 11
Mounting screws for the spacers supplied.
Figure 12
Rear of
the
vehicle
Figure 10
Rear of
the
vehicle
Rear of
the
vehicle
30/143