Pommier A5441 Mode D'emploi page 27

4. OVERALL PRODUCT DIMENSIONS
See figures 4 to
See figures 4 to
See figure 1
Low plate short arm (see table 4),
High plate short arm (see table 4),
Figure 8
D Low plate
High plate
7
C Low plate
High plate
7
H Tube height
0
484
−35
Figure 4
0
734
−35
Figure 6
The arms can be trimmed by cutting in accordance with the tolerance
dimensions.
After cutting, weld on a metal sheet with the same thickness as the arm to
close the profile and weld a 30x130 ridge to ensure the rigidity of arms.
If you use clamps to secure the tube, add Ø15 holes with the same contours as
the original part.
484, 633, 734 and 883 are the uncut dimensions.
Square steel tube
Long arm
Short arm
Long arm
Short arm
Long arm
Short arm
Long arm
Short arm
Table 4
Low plate long arm (see table 4),
High plate long arm (see table 4),
838
652
838
653
1074
838
1035
832
120
0
633
−150
Figure 5
883
−150
Figure 7
0
27/143