8
Testing the computer-to-printer
connection
Use the following procedure to make sure you properly connected
your computer to the printer. If you are using an optional interface,
skip this procedure.
1. Turn on your computer; then turn on your printer.
2. Bring up a DOS prompt on your computer screen such as:
C:>
3. Type the following:
PRINT AUTOEXEC.BAT
The computer displays the following message:
NAME OF LIST DEVICE (PRN):
4. Type the following:
LPT1
The printer prints the AUTOEXEC.BAT file.
If nothing prints or the results are not what you expect, make sure you
used the proper cable and that the cable is connected securely to both
the computer and the printer.
13