Publicité
Les langues disponibles
Les langues disponibles
5.
Remove the three screws securing the controller board; then pull the tab on the
bracket to release the controller board.
Warning:
w
Avoid touching the electrical components that are exposed after you
remove the cover from the mount window. They may be very hot if
the printer has been used recently.
c
Caution:
Before you remove the controller board, be sure to discharge any
static electricity on your person by touching the printer's shield
case. Otherwise, you may damage static-sensitive components.
6.
Grasp the board with both hands and pull it straight out of its slot.
D-10
Option Installation
Publicité
Chapitres
Dépannage
