Epson EPL-5000 Guide De L'utilisateur page 703

Note:
If you install the EpsonScript Level 2 SIMM and an optional cartridge, you must
choose which one you will use from the SelecType Level 2 OPT menu. You cannot
use both options at the same time. For more information on setting the OPT
option, see 2-29.
EPSON® C83213] Optional Kit for Microsoft® At Work Printing Software
needs at least 7.5 MB of available hard-disk space on your computer (you will
need less space if you do not install all components).
Optional Interface Cards
To add a parallel or serial interface to your printer, use one of the following:
Serial Interface Card
32KB Serial Interface Card C82307]
32KB Parallel Interface Card
To add a direct connection to an IBM
following:
Coax Interface Card
Twinax Interface Card
The coax and twinax connectors each contain a parallel interface. Since the
printer's built-in parallel interface remains active, this gives you two parallel
interfaces and a coax or twinax interface. Print jobs can be sent to any connection,
and the printer automatically switches between the active ports.
The twinax interface is compatible with the following IBM systems: AS-400,
System 36, 5251 (model 12), System 34, System 38, and 5294. When equipped
with the EPSON twinax interface, the printer can be used in place of the
following IBM system printers: 4210, 5224 (model 1 and 2), 5256 (model 1, 2,
and 3), 3218 (non IPDS), 4214 (model 2), 5225 (model 1, 2, 3, and 4), and 5219
D01, D02.
The coax interface allows the printer to be connected to the following IBM
control units and mainframe systems: 3174, 3276, 4274, and 3270.
To add a direct connection to a Macintosh
EpsonScript Level 2 SIMM module, use the AppleTalk Interface Card (C82312]).
D-16
Option Installation
C82305]
C82310]
®
mini or mainframe system, use one of the
C82314]
C82315]
®
computer with the optional