Buttons - Epson EPL-5000 Guide De L'utilisateur

Buttons

Level 1
Level 2
On Line
Exit
u d l r
Initialize
/Reset
Enters SelecType Level 1. For a complete
description of SelecType, see Chapter 2.
Enter SelecType Level 2. For a complete description
of SelecType, see Chapter 2.
Switches the printer between on-line and off-line
status. When the printer is in the SelecType mode,
this button is used to exit SelecType and return to
the previous status, on line or off line.
Exits SelecType
Selects and sets the settings in SelecType mode.
Cancels some settings made with SelecType or software
commands. The settings canceled by this button depend
on how long you press the button.
RESET—Hold down this button until RESET
appears on the display panel. This function returns
settings to those previously saved with SelecType.
The printer finishes printing the page already in
progress at the moment this button is pressed;
however, all remaining data is discarded.
INITIALIZE—If you continue to hold down this
button after RESET appears, INITIALIZE appears
on the display and SelecType settings return to the
settings in effect at power on. The received data may
be cleared.
FACTORY RESET—When you hold down this
button while you turn on the printer, FACTORY
RESET appears on the display and all the SelecType
settings return to the factory default settings.
Using Your Printer
1-5