Pjl Mode - Epson EPL-5000 Guide De L'utilisateur

Graphics
Select single-density graphics mode
Select double-density graphics mode
Select high-speed double-density graphics mode
Select quadruple-density graphics mode
Select graphics mode
Reassign graphics mode
Select 9-pin graphics mode (FX only)

PJL Mode

This section lists the available commands for the Printer Job Language (PJL). For
more information on PJL, see Hewlett-Packard's Printer Job Language Technical
Reference Manual.
Function
COMMENT
DEFAULT
DINQUIRE
ECHO
ENTER
INFO
INITIALIZE
INQUIRE
RESET
SET
UEL/SPJL
USTATUS
USTATUSOFF
PJL
You can also enter the EJL emulation from the PJL emulation by specifying EJL
as the destination language of the ENTER command.
C-12
Command Summary
Command
@ PJL COMMENT <words> [<CR>] <LF>
@ PJL DEFAULT [LPARM] [<CR>] <LF>
@ PJL DINQUIRE [LPARM] [<CR>] <LF>
@ PJL ECHO [Words] [<CR>] <LF>
@ PJL ENTER LANGUAGE = *** [<CR>] <LF>
@ PJL INFO read only variable [<CR>] <LF>
@ PJL INITIALIZE [<CR>] <LF>
@ PJL INQUIRE [LPALM] variable [<CR>] <LF>
@ PJL RESET [<CR>] <LF>
@ PJL SET [LPARM] [<CR>] <LF>
<ESC>%-12345X
@ PJL USTATUS variable = value [<CR>] <LF>
@ PJL USTATUSOFF [<CR>] <LF>
@ PJL [<CR>] <LF>
ESC K
ESC L
ESC Y
ESC Z
ESC *
ESC ?
ESC ^