Epson EPL-5000 Guide De L'utilisateur page 511

SUB CONFIG.
SYSTEM
CONFIG.
Level 2 functions
The Level 2 main menu items are as follows:
EMULATION
INTERFACE
RX-BUFFER
SIZE
CH TIMEOUT
AUTO CONT.
2-4
SelecType
Defines the printer's subconfiguration. The
settings here depend on the printer mode, and can
include such features as symbol set and number of
text lines.
Registers the current printer system configuration
by saving Level 1 settings. This menu item is also
used to specify page protection, the top and left
offsets, and to display the amount of printer
memory available.
Specifies an emulation mode and assigns it to an
interface (when an optional interface is being
used). Standard emulation modes available are HP
LaserJet 4L, Epson LQ, Epson FX, EPSON GL/2,
or HP LaserJet 4L & Epson LQ. Other modes
become available with the installation of options.
Configures the interface.
Specifies the size of the receive buffer.
Defines the channel timeout. If no data is received
during the specified period, the printer switches
channels.
Switches auto continue on and off. When auto
continue is switched on, the printer continues
printing even though certain error conditions
occur.