Level 1 Menus - Epson EPL-5000 Guide De L'utilisateur

5. Set, select, or execute the option.
When the option you want to select is displayed, press r to set, select,
or execute it.
Press r to select STD. SET disappears from the display and the
> moves to the right of the display, indicating the new option has
been selected. At the same time,
menu option, indicating that you are back in the main menu.
A INPUT STD
6. Save the new settings and exit SelecType
When you press the r in the submenu and return to the main menu, the
new settings remain in effect until you change it again or turn off
the printer.
If you want the new settings to remain in effect even when
you turn the printer off and on, simply exit SelecType by pressing
the EXIT button.
Note:
If you exit SelecType before you select an option by pressing the l in
the submenu, the previous settings are restored.

Level 1 Menus

This section describes all of the menu items and submenu items
available in SelecType Level 1. Most menus and submenus are the
same regardless of the printer emulation mode. However, the options
available for ORIENT., FONT, and SUB CONFIG. differ depending
on the printer emulation mode. The options available for the LQ/FX
emulation mode can be found on page 2-30.
See the Quick Reference Card at the back of this manual for a
complete map of all the SelecType menus and submenus.
2-10
SelecType
A
moves to the left of the main
>