Connecting To A Computer - Epson EC-C110 Guide Rapide

4. When you see the Select Your Connection screen, select one of the following and
follow the on-screen instructions:
■
Wireless connection
In most cases, the software installer automatically attempts to set up your wireless
connection. If setup is unsuccessful, you may need to enter your network name
(SSID) and password.
■
Direct USB connection
Use the micro USB cable that came with the printer.
Note: You can also print wirelessly using Wi-Fi Direct

Connecting to a Computer

Your printer provides several ways to connect, both at home and on the road:
■
Connect to your computer using the micro USB cable and the EC-C110 software
installed on the computer, as described on page 5.
■
Connect to a Windows computer using the micro USB cable and the built-in basic
driver.
1. Disconnect the printer from your computer.
2. On the printer's control panel, select
press
OK
3. Connect the printer to your computer using the micro USB cable, as shown
above, then press
4. Open
SETUP
5. Follow the on-screen instructions to install the driver.
6
Connecting to a Computer
.
on the printer's control panel.
OK
or
Computer My Computer
.
® , as described on page 7.
Menu > EC-C110 Basic Driver.
on your system, then double-click
Then
>
EPSON