Selecting Fonts - Epson EPL-5000 Guide De L'utilisateur

Note:
The EPL-5200+ can print fonts generated by Bitstream
and Bitstream Fontware™ Installation Kits using Bitstream Fontware
Typeface Packages for the PC. See your FaceLift or Fontware user's
guide for instructions on using Bitstream fonts with HP LaserJet
compatible printers.

Selecting Fonts

You almost always select fonts from the Font menu of your software
application. If you are unsure how to do this, check the manual that
comes with your software.
If you are sending unformatted text to the printer directly from
®
MS-DOS or if you are using a simple software package that does not
include font selection, you can select fonts by using the Remote
Control Panel utility. For information on how to do this, see Chapter 4.
Note:
Selecting a font using the Remote Control Panel utility or SelecType is
not recommended. Selecting fonts from your software program is
easier, and any font selection you make from your software overrides
the selection you make from the Remote Control Panel or SelecType.
5-8
Fonts
® ®
FaceLift