Epson EPL-5000 Guide De L'utilisateur page 628

RESELECT TRAY
The SelecType Level 1 INPUT option item is set to OPT, even though
the optional lower paper cassette is not installed. Turn off the printer
and install the optional lower paper cassette if you have one. Or press
Continue to automatically switch to the standard paper tray. After
printing, be sure to use the SelecType INPUT option to change the
input setting to STD.
RESET (status)
Reset is executed. The settings return to those previously saved with
SelecType and the buffer is cleared.
STANDBY (status)
The printer is in its low power state; however, it is still on line if the
On Line light is on.
WARMING UP (status)
The printer is warming up.
Troubleshooting and Maintenance
6-21