Epson EPL-5000 Guide De L'utilisateur page 619

Completely blank pages
Check the TONER option in SelecType Level 2 or open the printer
cover. The COVER OPEN message also displays the amount of
remaining toner. If toner is low (E* F), replace the imaging cartridge
as described later in this chapter.
Be sure the imaging cartridge is installed as described in the Getting
Ready! guide or "Replacing the Imaging Cartridge" later in this
chapter.
The problem may be with your software program or interface cable.
Print out a status sheet. If blank pages continue to print, the problem
may be with the printer. Turn off the printer and contact your dealer.
Printed image is light or faint
Darken the density setting as described in "Adjusting print density" on
page 6-25.
Check the TONER option in SelecType Level 2 or open the printer
cover. The COVER OPEN message displays the amount of remaining
toner. If toner is low (E* F), replace the imaging cartridge as
described later in this chapter.
Your paper may be moist or damp. Printing is sensitive to moisture
absorbed by the paper. The higher the moisture content in the paper,
the lighter the printed output. Do not store your paper in a humid or
damp environment.
Turn off the printer. Take out the imaging cartridge, shake it from side
to side to distribute the toner, and then reinstall it. If the problem
persists, replace the imaging cartridge as described at the end of this
chapter.
6-12
Troubleshooting and Maintenance