Publicité
Les langues disponibles
Les langues disponibles
The selections available in this list are: Off, On, Auto (default).
The On and Auto settings are identical, and normally you should
set Page Protect to Auto.
If a memory error occurs, change the Page Protect setting to Off
and try printing again. If you continue to get a memory error, you
will need to increase your printer's memory.
Note:
Changing the Page Protect setting reconfigures printer memory,
which causes any downloaded fonts in printer memory to be
erased.
Image Adapt
Use this pull-down menu to switch the Image Adapt function on
and off. When the Image Adapt function is on, the printing speed
is increased.
The selections available in this list are: Image adapt on, Image
adapt off (default), Image adapt auto. The On and Auto settings
are identical.
Note:
When this setting is on, the fonts printed may not be what you
expected.
Feeder
This pull-down menu shows all of the optional feeders that have
been installed. Use it to select the feeder you want to use for
printing.
The selections available in this list are: Standard (default) or
Paper Cassette[PC].
Printer Driver Configuration
3-11
Publicité
Chapitres
Dépannage
