1.
Introduction
Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer
We hope your new tool brings you much enjoyment and
success.
Note:
According to the applicable product liability laws, the
manufacturer of the device does not assume liability
for damages to the product or damages caused by the
product that occurs due to:
• Improper handling,
• Non-compliance of the operating instructions,
• Repairs by third parties, not by authorized service
technicians,
• Installation and replacement of non-original spare
parts,
• Application other than specified.
We recommend:
Read through the complete text in the operating in-
structions before installing and commissioning the
device.
The operating instructions are intended to help the user
to become familiar with the machine and take advan-
tage of its application possibilities in accordance with
the recommendations.
The operating instructions contain important informa-
tion on how to operate the machine safely, profession-
ally and economically, how to avoid danger, costly re-
pairs, reduce downtimes and how to increase reliability
and service life of the machine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country.
Keep the operating instructions package with the
machine at all times and store it in a plastic cover to
protect it from dirt and moisture. Read the instruction
manual each time before operating the machine and
carefully follow its information. The machine can only
be operated by persons who were instructed concern-
ing the operation of the machine and who are informed
about the associated dangers. The minimum age re-
quirement must be complied with
In addition to the safety instructions in this operating
manual and the separate regulations of your country,
the generally recognised technical rules relating to the
operation of such machines must also be observed.
We accept no liability for accidents or damage that
occur due to a failure to observe this manual and the
safety instructions.
2. Device description (fig. A)
1.
Shift stick
2.
Throttle Control
3.
Hand Grip
4.
Lift point
5.
Engine
6.
Exciter
7.
Base plate
8.
Handlebar
9.
Topping hole for exciter oil
10. Spark plug
11. Muffler
12. Choke lever
13. Fuel tank cover
14. Fuel tank
15. Throttle control assy.
16. Starting lever
17. Recoil starter
18. Air cleaner
19. Oil dipstick
20. Drain plug
21. Engine switch
22. Ventilation screw
23. Oil dipstick
24. Fuel valve
3. Scope of delivery
• Plate compactor
• Transport fixture
• Rubber pad
• Enclosed accessories bag
• Manual
www.scheppach.com
GB | 25