Publicité
Les langues disponibles
Les langues disponibles
18.4 Commissioning
Switch on balance
Connect network adapter of ionizer to scale,
as shown on diagram.
Connect network adapter of ionizer to power
supply.
Turn on ionizer as shown on diagram [on].
The display
(only ABP series)
TABP-BA-e-2212
Plug the connected ionizer-AC adapter
and the net cable into the DC IN-
connection (for the ionizer). Connect the
power plug of the ionizer on a plug-in
socket.
Connect the connections of the ionizer (2
connections) on the backside of the ionizer
with the ionizer connecting cable.
Attach the adapter cable holder on the
backside of the main housing to the
positions shown in the figure. Remove the
backing paper from the holder, to uncover
the adhesive surface, and press then the
adhesive surface on the main housing in
the alignment shown in the figure.
will light up.
148
Publicité
