KERN&SOHN ABP Serie Mode D'emploi page 242

For the first input the display for entering a
memory name will appear.
Use the navigation keys ,  to select a
memory space and confirm using the OK-key.
If required, change name and confirm using
the OK-key.
To overwrite a stored reference continue by referring to chap. 14.2.4
Further steps:
 Loaded reference weight = 100 %
or
 Loaded reference weight = user defined [%]
+
Loaded reference weight = 100 %
 Select 100PER1, 2 or 3 (or own
description) and confirm using the OK-key
 If required, place empty container on
scale and tare.
 Load reference weight corresponding to
100 %
(Minimum weight: Readability d x 100).
Wait until stability display ( ) has settled,
then confirm using the OK-key.
 The reference will be imported and
displayed.
 Confirm using the OK-key
 From now on the weight of the sample will
be shown in percent based on the
reference weight
91 TABP-BA-e-2212