Publicité
Les langues disponibles
Les langues disponibles
14.4 Totalization
This function is used to automatically add any number of single weighings to a total
sum.
When the standstill control (
to an optional printer or a PC. The displayed value is added into the total adding
memory. Afterwards automatic taring will take place. This process is repeated newly
every subsequent time a new sample is placed on the weighing pan. When the last
single weighing process is finished, press the PRINT key to receive the total sum
("TOTAL=").
Selecting an application, see chap. 11.1.4
The available applications will be
displayed.
Use the navigation keys , to select
<Add-on mode>. The framing will indicate
the current selection.
If required, place the empty container on
the scale and tare.
To start the add-up sequence, press the
OK-key.
If connected to an optional printer, a
header will be issued.
Place first good to be weighed on balance.
When the standstill control ( ) is complete
the weighing value is automatically issued
to the optional printer. The displayed value
is added into the total adding memory.
Afterwards automatic taring will take place.
95
is complete the weighing value is automatically issued
TABP-BA-e-2212
Publicité
