KERN&SOHN ABP Serie Mode D'emploi page 274

15.6 Interface commands
The weighing balance recognises the commands listed below.
1. Data output
Order Function
D02 Continuous data output of stable weighing values
D03 Status of stability display is attached to the data in the continuous output
(U: instable; S: stable).
D05 Single output
D06 Automatic output
D07 Single output. Status of stability display is attached to the data in the
output (U: instable; S: stable). (not applicable in ABP-A series)
D08 Single output with stable weighing value
D09 Cancel output
2. Key operations
Order Function
POWER
Press simulation
DIGIT
Press simulation
PRINT
Press simulation
TARE
Press simulation
CAL
Press simulation
MENU
Press simulation
ION
Press simulation
ENTER
Press simulation
UP
Press simulation
DOWN
Press simulation
LEFT
Press simulation
RIGHT
Press simulation
123 TABP-BA-e-2212