Publicité
Les langues disponibles
Les langues disponibles
10.4 Functions of the ABP-A series (Standard weighing mode)
10.4.1 Measuring with the automatic door function
(Position memory function)
This function opens and closes the
glass doors (top, left, right) automatically
when the buttons „open and close door"
are actuated.
The glass doors to be opened and to be
closed and the percentage by which the
glass doors shall open, can be adapted
according to the application.
When pressing the keys "Open & close
door" with open door, the balance
memorizes this door position and closes
the door.
Make sure that the stopper knobs are attached to the glass doors (top,
left, right) before switching-on the device.
Otherwise the glass doors could be damaged.
Configuration of the automatic door function (Position memory function)
One individual button to open and to close the door can be configured in a way that it
will open up to three doors at the same time (top, left, right) to their set positions.
Specific examples for application
The door opening and closing button (left) shall save the opening of the glass doors
(left/right) on half height.
Configure as follows:
(1) Open the glass doors (left/right) manually till to half position.
(2) Now press the key to open and to close the door (left).
(3) The glass doors (left/right) are automatically closed. The process is now
registered.
(4) By pressing the door opening and closing button (left) the glass doors (left/right)
now are opened automatically till to half position. If you press again the door opening
and closing button (left), after by that having opened the
glass doors (left/right), the glass doors (left/right) now are closed automatically.
To select another setting, repeat the steps (1) (2) (3).
The settings of the buttons to open and to close the door are reset when the balance
is switched off.
Manual actuation of the trigger (manual start)
By slight pressure on the handles of the glass doors in opening direction, the process
is started and the respective doors are completely opened. By slight pulling on the
handles in closing direction, the doors will close automatically.
The function of the manual trigger (manual start) can be disabled.
see chap. 13.9.
TABP-BA-e-2212
Door opening and closing button
(left/right)
46
Publicité
