KERN&SOHN ABP Serie Mode D'emploi page 233

Touchless sensor operation with disabled multifunctional mode
Disabling the multifunctional mode permits a faster operation of the IR sensors than
with enabled multifunctional mode. When the multifunctional mode is disabled, two
functions may be assigned which are shown in the following illustration.
The function will be executed when you run your hand or your fingers over the
touchless sensor and the LED is lighting up.
Procedure for the configuration of the multifunctional mode
For calling system settings see chap. 11.1.3
Use the navigation keys ,  to select
<Touchless multifunctional mode> and
confirm using the OK-key.
Use the navigation keys ,  to select
setting [On] or [Off] and confirm using the OK-
key
Use the ON/OFF button to return into
weighing mode
TABP-BA-e-2212
Right IR sensor (immediate)
Run your hand or your fingers over the
sensor, the LED will light up
Left IR sensor (immediate)
Run your hand or your fingers over the
sensor, the LED will light up
82