Publicité
Les langues disponibles
Les langues disponibles
12.4 Settings for Stability and Response
Exists the possibility to tune the stability of the display and the degree of response of
the balance to the requirements of certain applications or the environmental
conditions.
Most measurements may be carried out by using default settings. In standard
weighing mode, stability and response have the same priority. For certain
applications such as e.g. dosage do use the dosing mode. In dosing mode the
response degree has the higher priority.
Beside the selection standard / dosing mode the stability of the display and the
response degree of the balance can additionally adapted in the menu.
Please note that in general slowing down response times result in higher stability of
the set data handling, while speeding up response times have an influence on the
stability deterioration.
12.4.1 Stability and response settings via „Smart Setting display" (without
invoking menu)
If there is a change in ambient conditions the responding qualities or the stability of
the scale may be optimized – even during weighing – by simply pressing the key.
In weighing mode press
Settings.
Priority on response
Every time the key is
pressed, the priority for the
response will be increased.
The icon will be moving in
the direction of <R>.
TABP-BA-e-2212
Smart setting display
for Response Settings or
Smart setting display
Operation
for Stability
Priority on stability
Every time the key is
pressed the priority for the
stability will be increased.
The icon will be moving
in the direction of <S>.
66
Publicité
