Publicité
Les langues disponibles
Les langues disponibles
10.7 Switch off the balance
Press the ON/OFF button. The balance is in standby
mode, that means that the balance is now in state ready-
for-operation. Immediately after switching-on it is ready
for operation (press any key) without warm-up time.
To switch-off the balance completely, separate balance
from power supply.
When you see messages such as [Communication] do not disconnect scale
from power supply.
10.8 Switch-over weighing unit
To return the display to the units previously
enabled in the menu press the UNIT-key,
see chap. 12.7.
When switching-on the balance, the unit in which the balance has been
switched off, will be displayed.
10.9 Change readability (1D/10D) (not available for verified models)
1d Display
TABP-BA-e-2212
10d Display
50
Publicité
