Publicité
Les langues disponibles
Les langues disponibles
Assignment configuration of touchless functions
For calling system settings see chap. 11.1.3
Use the navigation keys , to select
<Touchless multifunction assignment> and
confirm using the OK-key.
Use the navigation keys , to select
<Right IR sensor (short)> and confirm using
the OK-key.
Use the navigation keys , to select the
function which you want to assign to the right
IR sensor (short)> and confirm using the OK-
key.
Use the ON/OFF button to return into
weighing mode
Configure the right IR sensor (long), the left IR sensor (short) and the left IR sensor
(long) on the same way.
Buttons
Button open and close door (right)
Button to open and to close the door (left)
[Button [PRINTING]
Button [O/T]
[ION button]
[None]
The standard settings for the allocation of the touchless functions are as follows.
Multifunctional mode is enabled
83
Function
Opening and closing the right door
Opening and closing the left door
Data output to external device (weighing mode)
Taring / Setting to zero
Start ionizer
Disables the touchless sensors
Multifunctional mode is disabled
TABP-BA-e-2212
Publicité
