Publicité
Les langues disponibles
Les langues disponibles
12.7 Weighing Units
This function is used to define which weighing units you wish to apply. By pressing
the UNIT key, the display can be switched over to the units enabled before in the
menu.
Scales with type approval allow you to change to the following units:
1. Call function
In weighing mode press and hold the UNIT-
key for approx. 3 sec until the <Unit setting>
menu is displayed.
Confirm using the OK-key and the available
units will be displayed.
Use the navigation keys to , select the
unit and confirm using the OK-key.
2. Enable/disable units
Use the navigation keys , to enable (on) /
disable (off) the function and confirm using the
OK-key.
3. Return to weighing mode
Press the ON/OFF key
12.8 User administration log-in function
The scale has a user administration where individual access rights for administrator
and user levels may be defined. The input of a user name and password is required
for access.
The administrator can use all the functions and has all rights. Only the administrator
is authorized to create new user profiles and to grant access rights.
A user on the other hand may not have access to all functions. He/she has limited
rights that are defined in the user profile. The maximum of users is limited to 10.
69
[g] → [mg] → [ct]
TABP-BA-e-2212
Publicité
