KERN&SOHN ABP Serie Mode D'emploi page 219

12.6 Standstill width
If the stability display lights up ( ), the weighing result will be stable within the range
indicated by the standstill width.
Set range for stability determination:
1. Call function
 see chap. 11.1.2.
Use the navigation keys ,  to select
<Stability detection range> and confirm using
the OK-key.
2. Set range for stability determination
Use the navigation keys ,  to select setting
and confirm using the OK-key.
0.5d Stability display ( ) very quiet environment
1000d Stability display ( ) busy environment
3. Return to weighing mode
Press the ON/OFF key
TABP-BA-e-2212
  
68