Publicité
Les langues disponibles
Les langues disponibles
Checking the functions assigned to the touchless sensors
(only when the multifunctional mode is enabled)
(1) Run your hand in load weighing mode over the right and the left IR sensors, to
make the LEDs light up for approx. 2 seconds.
(2) The function allocation status is shown on the display field.
When the settings of the IR sensors are not correct, configure the settings anew.
(3) Run your hands over the right and the left IR sensor, to make the LEDs light up
for approx. 2 seconds.
(4) Return to the load weighing mode.
The button [ON/OFF] can also be used for returning into the load weighing mode.
Move your hands simultaneously over
the right and the left IR sensor, to make
the LEDs light up for approx. 3 seconds.
TABP-BA-e-2212
Call up the setting allocation menu by
carrying out the operation shown on the
left
84
Publicité
