Important
Never operate the starter more than 5 seconds at a
time. If needed, allow 10 seconds before attempting to
restart the engine.
4) Move the fast-idle lever towards its vertical position (A,
fig. 17.2) until the engine is running at approx.
1400-1500 rpm.
Important
E
Do not rev up the engine when it is cold. Allow
some time for oil to warm up and reach all points that
need lubricating.
5) Then, as the engine warms up, gradually move the
fast-idle lever until bringing it in a vertical position (A).
When fully warm, the engine should hold idling speed
with the fast-idle device fully closed.
High ambient temperature (over 35 °C):
Follow the same procedure, however, do not use the
fast-idle device.
Low ambient temperature (below 10 °C):
Follow the procedure for "Regular ambient
temperature", however allow 5 minutes for the engine to
warm up (step 5).
26
1
2
fig. 17.3