Right switch (fig. 9)
1) ENGINE STOP switch, two positions:
position
(RUN) = run.
position
(OFF) = stop.
Warning
This switch is mainly intended for use in emergency
cases when you need to stop the engine quickly. After
stopping the engine, return the switch to the
to enable starting.
E
Important
When you have been riding with the lights on, and
you stop the engine using switch (1) and leave the
ignition key in the ON position, the lights will remain on
and the battery may run flat.
2) Button
= engine start.
Throttle twistgrip (fig. 9)
The twistgrip (3) on the right handlebar controls the
throttles. When released, it will spring back to the initial
position (idling speed).
16
Front brake lever (fig. 9)
Pull in the lever (4) towards the twistgrip to operate the
front brake. The system is hydraulically operated and you
just need to pull the lever gently.
The control lever is provided with a dial adjuster (5) for
lever distance adjustment from twistgrip on handlebar.
Warning
position
Please read the instructions on page 26 before
using these controls.
4
5
1
2
3
fig. 9