Rizzoli S Série Manuel D'utilisation page 115

to treat the plate with the oil for plate care, in this
way the plate is protected against moisture in the
best way. To remove the plate, you have to lift it
5.11 MAINTENANCE OF THE LIGHT
WARNING! Before starting any maintenance operation for the light, you must discon-
nect it from AC power and be sure that the cooker is not powered. Verify also if the
cooker is cold and if the light was turned on in the previous minutes.
Oven lamp suffers high temperatures. Even if it
is designed to work in these conditions, it could
become out of order. You have to replace it with
a lamp with the same features (halogen lamp 25W
230V 300° connection G9). To replace the lamp
you have to remove the lamp cover built­in insert­
ed, remove the lamp, insert the new lamp and fi­
Picture 42 - Take-down the oven lamp.
up. When you reinsert the plate, keep in mind to
leave the 1 or 2 millimetres to allow the thermal
expansion of the plate itself.
nally replace the interlocking lamp cover. Seldom,
it is necessary to clean the glass of the lamp cover.
To make this, you have to remove the lamp cover,
remove the external residuals due to the cooking
steams, wash the lamp cover and once it is dry you
can screw it in its place.
113