Precaution; Warning - Boston Scientific Solyx Mode D'emploi

PReCaUTIon

Hold each side of the mesh carrier (See Figure 3) to avoid
possible glove puncture.
figure 3: Mesh assembly Placement onto Delivery Device
figure 4: Mesh orientation on Delivery Device
5. Insert the delivery device into the dissection pathway
targeting placement of the carrier at a 45˚ angle off the
midline. (See Figure 5) Advance the delivery device towards
the obturator foramen just lateral to the inferior pubic
ramus (See Figure 5) until the midline mark on the delivery
device is approximately at the midline position under the
urethra. Deposit the carrier by gripping the deployment
mechanism with one hand and pulling the delivery device
handle back with the other hand (See Figure 6). This action
will deposit the carrier into surrounding muscle tissue
releasing it from the delivery device.
noTe: Once the carrier is deposited in tissue, it is not
designed to be reconnected onto the shaft tip for additional
tension/adjustment.

WaRnInG

If excessive resistance is encountered during advancement/
withdrawal, stop and determine remedial action prior to proceeding.
Flush With Delivery
Device Shoulder
Outside Curve
Of Delivery Device
7
Black (K) ∆E ≤5.0