Boston Scientific Solyx Mode D'emploi page 8

figure 5.
figure 6.
figure 7
6. Remove the delivery device from the incision. Bring the
deployment mechanism back to start position, flush with
the handle (See Figure 7).
noTe: Once the carrier is deposited in tissue, it is not
designed to be reconnected onto the shaft tip for additional
tension/adjustment.
7. Place the second mesh carrier onto the delivery device
following instructions from Step 4. Make sure that the mesh
is not twisted so that it will lie flat under the urethra when
placement is complete.
Black (K) ∆E ≤5.0
8