Replacing The Oven Lamp - BORETTI CFBI9015IX Prescriptions De Montage Et Mode D'emploi

To remove the RH and LH sliding guides from the wire support:
* Find the safety locks. These are the tabs that clip over the fixing wire (arrow
1 in fig. 6.8).
* Pull the safety locks away from the fixing wire to release the sliding guide
(arrow 2 in fig. 6.8).
Cleaning the sliding shelf supports:
* Wipe the supports with a damp cloth and a mild detergent only.
* Do not wash them in the dishwasher, immerse them in soapy water, or use
oven cleaner on them.

Replacing the oven lamp

Warning
Ensure the appliance is switched off and disconnected from the electrical
power supply before replacing the lamp to avoid the possibility of electric
shock.
* Let the oven cavity and the heating elements to cool down.
* Switch off the electrical supply.
* Remove the protective cover "A" (fig. 6.9).
* Replace the halogen lamp "B" with a new one suitable
for high temperatures (300°C) having the following
specifications: 220-240 V, 50/60Hz and same power
(check watt power as stamped in the lamp itself)
of the replaced lamp.
A
B B
249
WRONG
CORRECT
A
Fig. 6.9