Maintenance, Troubleshooting; Visual Inspection; Cleaning; Accessories - Burkert 3360 Guide Rapide

16

MAINTENANCE, TROUBLESHOOTING

The maintenance work is described in the separate service
instructions.
The fault description can be found in the operating
instructions.
Both instructions can be found on the website
country.burkert.com.
16.1

Visual inspection

According to the usage conditions, perform regular visual
inspections:
→
Check medium ports for tightness.
→
Check relief bore on the pipe for leaks.
Figure 32: Relief bore
17

CLEANING

The use of alkaline cleaning agents is not permitted for cleaning
the surface of the device.
52
Relief bore
English
Type 3360, 3361

Accessories

18 ACCESSORIES
18.1

Communications software

The PC software Bürkert Communicator is designed for commu-
nication with Bürkert devices.
A detailed description of the installation and operation
of the PC software can be found in the associated oper-
ating instructions.
Download the software from: country.burkert.com
18.2 büS service interface
To communicate with the devices the PC requires a USB interface
and the USB-büS interface set available as an accessory.
USB büS-Interface-Set
USB-büS interface set 1
(includes power supply unit, büS stick, termi-
nating resistor, Y-distributor, 0.7 m cable with
M12 plug)
USB-büS interface set 2
(includes büS stick, terminating resistor,
Y-distributor, 0.7 m cable with M12 plug)
büS adapter for büS service interface
(M12 to micro-USB büS service interface)
Tab. 21: Components USB büS interface set
For Type 3360, 3361, see online at
country.burkert.com
- Other accessories (in the operating instructions)
- Spare parts (in the service instructions).
Order number
772426
772551
773254