Type 3360, 3361
General notes
▶ Do not make any internal or external changes to the device
and do not subject it to mechanical stress.
▶ Transport, install and dismantle heavy device only with the aid of
a second person and using suitable tools.
▶ Secure the device against unintentional activation.
▶ Only trained technicians carry out installation and mainte-
nance work.
▶ Note the system-specific safety regulations.
▶ Following an interruption in the power supply, ensure that
the process is restarted in a controlled manner. Observe the
sequence.
1. Connect supply voltage.
2. Charge the device with medium.
▶ Observe general engineering standards & rules.
▶ The valves must be installed according to the regulations
applicable in the country of use.
NOTE!
Electrostatically sensitive components/assemblies.
The device contains electronic components that are suscep-
tible to the effects of electrostatic discharging (ESD). Com-
ponents that come into contact with electrostatically charged
persons or objects are at risk. In the worst-case scenario, they
will be destroyed immediately or will fail after start-up.
• Observe the requirements for minimising or avoiding the
possibility of damage caused by sudden electrostatic dis-
charge in accordance with EN 61340-5-1.
• Do not touch electronic components when the supply voltage
is connected.
4
GENERAL NOTES
4.1
Contact address
Germany
Bürkert Fluid Control Systems
Sales Centre
Christian-Bürkert-Str. 13-17
D-74653 Ingelfingen
Tel. +49 (0) 7940 - 10-91 111
Fax +49 (0) 7940 - 10-91 448
E-mail: info@burkert.com
International
The contact addresses can be found on the back pages of the
printed operating instructions.
They are also available online at: country.burkert.com
4.2
Warranty
A precondition for the warranty is that the device is used as intended
in consideration of the specified operating conditions.
4.3
Information on the Internet
Operating instructions and data sheets for Type 3360, 3361 can be
found on the Internet at:
country.burkert.com
English
7