Disassembly; Packaging, Transport, Storage; Disposal - Burkert 3360 Guide Rapide

Type 3360, 3361
19

DISASSEMBLY

DANGER!
Risk of injury due to high pressure and escaping medium.
If the device is pressurised while being disassembled, there
is a risk of injury due to sudden depressurisation and medium
discharge.
▶ Before disassembling the system, switch off the pressure
and vent or empty the lines.
CAUTION!
Risk of injury due to heavy device.
During transportation or installation work, the device may fall
down and cause injuries.
▶ Transport, install and remove heavy device with the aid of
a second person only.
▶ Use suitable tools.
NOTE!
Installing in the AUTOMATIC operating state will damage the
device.
▶ If devices are to be re-used, set the MANUAL operating state
before they are removed.
→
If the device is to be re-used, set the MANUAL operating
state.
→
Disconnect the electrical connection.
→
Dismantle the device.
Disassembly
20 PACKAGING, TRANSPORT,
STORAGE
NOTE!
Transport damage.
Inadequately protected devices may be damaged during
transport.
• Protect the device against moisture and dirt in shock-re-
sistant packaging during transportation.
• Avoid exceeding or dropping below the permitted storage
temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location.
• Storage temperature: -40... +70 °C.
21

DISPOSAL

NOTE!
Damage to the environment caused by parts contaminated
with media.
• Dispose of the device and packaging in an environmentally
friendly manner.
• Observe applicable disposal and environmental regulations.
Observe national waste disposal regulations.
English
53