Burkert 3360 Guide Rapide page 15

Type 3360, 3361
Technical data
Energy storage SAFEPOS energy pack
C harging time: Maximum 100 seconds (dependent on oper-
ating conditions)
S ervice life: Up to 10 years (dependent on operating condi-
tions). The service life of 5 years was calculated based on the
following conditions:
ambient temperature
medium temperature
duty cycle
operating pressure
DN
Analogue inputs: (electrically isolated from the supply voltage
and analogue output)
Input data for set-point value signal
0/4...20 mA: Input resistance
Resolution
0...5/10 V: Input resistance
Resolution
Input data for actual value signal (optional)
4...20 mA: Input resistance
Resolution
30 °C
165 °C
100%
5 bar
DN32
60 Ω
12-bit
22 kΩ
12-bit, resolution on
0...10 V
60 Ω
12-bit
Frequency: Measuring range
Input resistance
Accuracy
Input signal
Signal form
Pt 100: Measuring range
Accuracy
Measuring current
Analogue output (optional)
Max. power: 1 0 mA (for voltage output 0...5/10 V)
Load: 0 ...800 Ω (for current output 0/4...20 mA)
Digital outputs (optional)
Current limit: 100 mA,
Digital inputs: 0...5 V = log "0", 10...30 V = log "1" inverted input
inverted accordingly (input current < 6 mA)
Communication interface with PC: Connection to PC using
USB-büS interface set
Communication software for PC: "Bürkert Communicator"
The digital input, digital outputs and analogue output are not
electrically isolated from the operating voltage. They relate
to the GND potential of the operating voltage.
Current limit: output voltage is reduced in the event of
overload.
English
0.2...6500 Hz
> 30 kΩ
0.1% of measured
value
> 300 mVss
Sine wave, square
wave, triangle wave
-20...+220 °C
0.01 °C
1 mA
15