Maintenance, Troubleshooting; Spare Parts; Transport, Storage, Disposal - Burkert 6240 Manuel D'utilisation

Masquer les pouces Voir aussi pour 6240:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

5.2 Electrical connection of the cable plug
WARNING!
Risk of injury due to electrical shock.
▶ Before reaching into the system, switch off the power supply and
secure to prevent reactivation.
▶ Observe applicable accident prevention and safety regulations for
electrical equipment.
If the protective conductor is not connected, there is a risk of electric
shock.
▶ Always connect protective conductor and check electrical continuity.
Tighten cable plug (for permitted types see data sheet), observing
max. torque 1 Nm.
Check that seal is fitted correctly.
Connect protective conductor and check electrical continuity.
8
6.1 Malfunctions
If malfunctions occur, check
whether
• the device has been installed
according to the instructions,
• the electrical and fluid connec-
tions are correct,
• the device is not damaged,
• all screws have been tightened,
• the voltage and pressure have
been switched on,
• the pipelines are clean.
8

TRANSPORT, STORAGE, DISPOSAL

NOTE!
Transport damages.
Inadequately protected equipment may be damaged during
transport.
• During transportation protect the device against wet and dirt in
shock-resistant packaging.
• Avoid exceeding or dropping below the allowable storage
temperature.
Incorrect storage may damage the device.
• Store the device in a dry and dust-free location.
• Storage temperature –40...+80 °C
Damage to the environment caused by device components con-
taminated with media.
• Dispose of the device and packaging in an environmentally friendly
manner.
• Observe applicable regulations on disposal and the environment.
10
english
If the magnet is not attracting
Possible causes:
• Short circuit or coil interrupted,
• core or core area dirty.
english
Authorized cable plug
e.g. Type 2508 (or Type 2509)
Seal
6

MAINTENANCE, TROUBLESHOOTING

WARNING!
Risk of injury from improper maintenance.
▶ Maintenance may be carried out by authorized technicians only and
with the appropriate tools.
Risk of injury from unintentional activation of the system and an
uncontrolled restart.
▶ Secure system from unintentional activation.
▶ Following maintenance, ensure a controlled restart.
7

SPARE PARTS

CAUTION!
Risk of injury and/or damage by the use of incorrect parts.
Incorrect accessories and unsuitable spare parts may cause injuries and
damage the device and the surrounding area.
▶ Use only original accessories and original spare parts from Bürkert.
▶ Do not open the fluidic part of the device without the consent of the
manufacturer.
Fitting
Coil
english
Type 6240
max. 1 Nm
Wearing part set can be
requested via the sales
offices by quoting the order
number of the device
(see .„4.3 Type label")
9

Publicité

Table des Matières
loading

Table des Matières