Scaling The Process Control; Set Dead Band For Process Control - Burkert 3360 Guide Rapide

Type 3360, 3361
9.9

Scaling the process control

Scaling process control affects the following functions:
• Dead band for process control
• Sealing function (CUTOFF), if process control (P.CO) is
selected in menu CUTOFF
Configuration option: Using the Bürkert Communicator
PC software or the display of the device (optional).
Display operation: Button functions
Select, activate
To scale process control, switch to the "Parameters" detailed
view for process controllers.
How to switch to detailed view:
→
When using Bürkert Communicator for the configuration,
select Process Controller
→
When using the display for the configuration, switch to
CONFIGURATION on the home screen and select
Controller.
You are now in the "Parameters" detailed view.
How to scale process control:
→
Select P.CO.scale.
→
Enter the minimum and maximum values.
The process control is now scaled.
Start-up
CUTOFF.type.
→
Confirm Back
in the navigation area.
Process

9.10 Set dead band for process control

Configuration option:
Using the Bürkert Communicator PC software or the
display of the device (optional).
Display operation: Button functions
Select, activate
To set the dead band, switch to the "Parameters" detailed view
for process controllers.
How to switch to detailed view:
→
When using Bürkert Communicator for the configuration,
select Process Controller
→
When using the display for the configuration, switch to
CONFIGURATION on the home screen and select
Controller.
You are now in the "Parameters" detailed view.
How to configure the dead band:
→
Select PID.PARAMETER.
→
Select DBND.
→
Enter percentage value.
The dead band is now configured.
English
Confirm Back
in the navigation area.
Process
39